Product Center

Waterproof/Dustproof/Shockproof Battery

----Guoan Energy Technology (Dongguan) Co., Ltd. R&D Center

1. Waterproof

Waterproof testing is a crucial part of product quality control, especially in fields such as consumer electronics, home appliances, automotive parts, and industrial equipment. Ensuring that products have good waterproof performance under various environmental conditions not only extends their service life but also enhances user experience. This article will discuss in detail the standards and requirements of waterproof testing and introduce how to conduct tests according to these standards.

 

1.1 Standards and Requirements for Waterproof Testing

IP Protection Rating Standard

The IP (Ingress Protection) rating is a protection rating standard formulated by the International Electrotechnical Commission (IEC) to evaluate the ability of equipment enclosures to protect against solid foreign objects (such as dust) and liquids (such as water). The IP rating consists of two numbers, the first representing the dustproof rating and the second representing the waterproof rating.

- Waterproof rating:

- IPX0: No special waterproof protection.

- IPX1: Protection against vertically dripping water.

- IPX2: Protection against dripping water at an angle of 15 degrees to the vertical.

- IPX3: Protection against spraying water.

- IPX4: Protection against splashing water.

- IPX5: Protection against low-pressure water jets.

- IPX6: Protection against powerful water jets.

- IPX7: Protection against short-term immersion (30 minutes, 1 meter deep).

- IPX8: Protection against prolonged immersion (more than 1 meter deep, specific conditions are defined by the manufacturer).

 

MIL-STD-810G Standard

MIL-STD-810G is a military standard for environmental testing of equipment formulated by the U.S. Department of Defense. It includes various environmental testing methods, including waterproof testing. This standard is applicable to equipment that needs to operate under extreme conditions, such as military communication equipment and field measuring instruments.

- Waterproof testing methods:

- Method 506.5: Rain test, simulating the performance of equipment in heavy rain.

- Method 512.5: Immersion test, simulating the performance of equipment in an underwater environment.

 

ISO 20653 Standard

ISO 20653 is a standard from the International Organization for Standardization (ISO) for the protection rating of electrical and electronic equipment in road vehicles. It is similar to the IP rating standard but focuses more on automotive applications.

- Waterproof rating:

- IPX9K: Protection against high-temperature, high-pressure water jets, suitable for car washes, etc.

 

1.2 How to Conduct Waterproof Tests According to Standards

   Preparatory Work

  Before conducting waterproof tests, the following preparatory work needs to be done:

- Determine the test standard: Select the appropriate test standard based on the product's application scenario and waterproof requirements, such as IP rating, MIL-STD-810G, or ISO 20653.

- Prepare testing equipment: Select appropriate waterproof testing equipment, such as pressure testers, water jetting devices, immersion tanks, etc., ensuring that the equipment meets the requirements of the relevant standards.

- Sample preparation: Prepare the samples to be tested, ensure they are in normal working condition, and record the initial performance parameters of the samples.

 

   Testing Steps

  Different waterproof testing standards and methods have different testing steps. The following uses the IP rating standard as an example to introduce the testing steps for common waterproof ratings:

a. IPX1/IPX2 Test

- IPX1 Test:

- Place the sample on the test bench and keep it vertical.

- Use a dripping device to drip water at a rate of 1 mm/min for 10 minutes.

- Check if water has entered the sample.

- IPX2 Test:

- Place the sample on the test bench, keep it vertical, and make it at a 15-degree angle to the vertical.

- Use a dripping device to drip water at a rate of 3 mm/min for 10 minutes.

- Check if water has entered the sample.

b. IPX3/IPX4 Test

- IPX3 Test:

- Place the sample on a rotating test stand and keep it vertical.

- Use a spraying device to spray the sample with water at a pressure of 50-150 kPa. The nozzle is 0.3-0.5 meters away from the sample, the spraying angle is 60 degrees, and the spraying time is 10 minutes.

- Check if water has entered the sample.

- IPX4 Test:

- Place the sample on a rotating test stand and keep it vertical.

- Use a spraying device to spray the sample with water at a pressure of 50-150 kPa. The nozzle is 0.3-0.5 meters away from the sample, the spraying angle is 180 degrees, and the spraying time is 10 minutes.

- Check if water has entered the sample.

c. IPX5/IPX6 Test

- IPX5 Test:

- Secure the sample on the test bench and keep it vertical.

- Use a low-pressure water jet device to spray the sample with a flow rate of 12.5 L/min. The nozzle is 2.5-3 meters away from the sample, and the spraying time is at least 3 minutes.

- Check if water has entered the sample.

- IPX6 Test:

- Secure the sample on the test bench and keep it vertical.

- Use a high-pressure water jet device to spray the sample with a flow rate of 100 L/min. The nozzle is 2.5-3 meters away from the sample, and the spraying time is at least 3 minutes.

- Check if water has entered the sample.

d. IPX7/IPX8 Test

- IPX7 Test:

- Place the sample in an immersion tank, ensuring that the sample is completely immersed in water.

- Adjust the water depth to 1 meter and immerse for 30 minutes.

- Take out the sample and check if there is any water inside.

- IPX8 test:

- Place the sample in an immersion tank, ensuring that the sample is completely immersed in water.

- Adjust the water depth (over 1 meter) and immersion time (usually over 30 minutes) according to the product design requirements.

- Take out the sample and check if there is any water inside.

 

Test Result Analysis

After completing the waterproof test, the test results need to be analyzed and recorded:

- Check the inside of the sample: Open the sample housing, check if there is any water inside, and record the location and amount of water ingress.

- Functional test: Perform a functional test on the sample to ensure that it still works properly after the waterproof test.

- Record and report: Record the test process and results in detail, generate a test report, and improve the product design based on the test results.

 

Conclusion

Waterproof testing is an important part of ensuring product quality and performance. Different standards and methods are applicable to different application scenarios. By understanding and following waterproof testing standards such as IP protection level standards, MIL-STD-810G standards, and ISO 20653 standards, and conducting scientific and reasonable testing according to standards, the waterproof performance of products can be effectively improved to meet market demand and user expectations. It is hoped that this article can provide valuable reference for professionals in related fields, so that they can better cope with waterproof testing challenges and enhance the market competitiveness of products.

 

2. Dustproof

2.1 Product Dustproof Rating

The product dustproof rating is usually expressed by the IP rating. The IP rating consists of two numbers, the first number represents the dustproof rating, and the second number represents the waterproof rating. The dustproof rating ranges from 0 to 6, as follows:

- IP0X: No protection, that is, no special protection.

- IP1X: Can prevent solid foreign objects larger than 50mm in diameter from entering, which is equivalent to preventing objects the size of a palm from entering.

- IP2X: Can prevent solid foreign objects larger than 12.5mm in diameter from entering, which is equivalent to preventing fingers or other similarly sized objects from entering.

- IP3X: Can prevent solid foreign objects larger than 2.5mm in diameter from entering, which is equivalent to preventing tools or wires from entering.

- IP4X: Can prevent solid foreign objects larger than 1mm in diameter from entering, including most mosquitoes.

- IP5X: Can prevent all dust from entering, that is, it achieves a completely dustproof effect.

2.2 Application Scenarios of Dustproof Rating

Different levels of dustproof capability are suitable for different application scenarios. For example:

- IP54-rated equipment is suitable for outdoor environments and can withstand dust and splashing water.

- IP68-rated equipment can be used underwater for a long time, which is very suitable for water sports or underwater operations.

2.3 Testing Standards and Methods

Dustproof rating testing methods include:

- IP0X: No protection.

- IP1X: Prevents solids larger than 50mm in diameter from entering.

- IP2X: Prevents solids larger than 12.5mm in diameter from entering.

- IP3X: Prevents solids larger than 2.5mm in diameter from entering.

- IP4X: Prevents solids larger than 1mm in diameter from entering.

- IP5X: Prevents harmful dust accumulation, but the amount of dust ingress does not affect the normal operation of the electrical appliance.

- IP6X: Completely prevents foreign objects and dust from entering.

 

Shockproof lithium batteries improve shock resistance performance through multi-dimensional technological innovation, mainly involving structural design, material application, and patent technology breakthroughs. The following is a summary of the core points:

3. Shockproof

3.1 High-strength shell and shock-absorbing components
Shock-resistant lithium battery shells generally use high-strength materials such as aluminum alloy, magnesium alloy, or stainless steel, which can withstand 1000℃ high temperature and have strong impact resistance. Some designs integrate spring and rubber pads in the interior to effectively absorb external impact force and reduce the risk of internal battery damage. For example, Jiangsu Fulaidis's patented technology uses intelligent connecting rods and fixing plates to achieve stable positioning of the lithium battery during driving.

3.2 Modular packaging technology
Solid-state packaging or gel packaging technology is used to enhance the sealing and stability of the battery and reduce electrolyte leakage caused by vibration. Epoxy boards, EVA foam, etc. are used for packaging and shaping, and further waterproof reinforcement is achieved through PVC heat shrink film and silicone rubber.

3.3 Material innovation and application

- Shock-resistant electrodes and electrolytes: Flexible graphite and lithium cobalt oxide are selected as electrode materials, and the electrolyte must have high fluidity and stability to ensure that ion transport is not disturbed during vibration.

- Auxiliary protective materials: Shock-absorbing pads and partition foams are used in the assembly process, which have both waterproof and flame-retardant functions, and improve the overall shock resistance.

3.4 Testing and verification

Shock resistance performance needs to be tested by simulating actual environmental tests such as vibration tables and impact testers to ensure stable operation under extreme conditions.

 


© Copyright 2024 Guoan Energy Technology (Dongguan) Co., Ltd. All rights reserved.

Privacy Policy  |  SEO | Support:300.cn